Call us 24/7+86 19066591275
Email：abbdcs36@gmail.com
Call us 24/7+86 19066591275

Category: Company News

Home / Company News (Page 5)
2024-12-02 BY
IN Company News

ABB PFCL201CE 50KN 3BSX802939-108 Tension sensor

Product introduction:

The ABB PFCL201CE 50KN is a high-precision tension sensor designed to measure the tension of banded materials such as paper, film, metal strips. The sensor is commonly used in process control applications to ensure that material tension on the production line remains stable and is suitable for the paper, packaging, printing and metalworking industries.

Product manual:

1：Basic parameter：

Model: PFCL201CE
Rated load: 50 kN (50,000 Newtons)
Measurement principle: Strain gauge technology is used to calculate tension by measuring the force on the material.
Accuracy class: High precision, usually ±0.5% or higher.

Electrical parameters

Supply voltage:
Usually 10-24 VDC, depending on the model.
Output signal:
Analog signal output: 4-20 mA or 0-10 V.
Digital signal output (optional) : Support Modbus or other industrial communication protocols.
Sensitivity:
The output sensitivity is about 2 mV/V, please refer to the product manual for specific parameters.
Impedance:
Input impedance: 350 Ω (typical)
Output impedance: 350 Ω (typical)

Mechanical parameters

Rated load: 50 kN
Overload capacity:
It is usually 150% of the rated load.
Maximum failure load: approx. 200%-300% rated load (see product manual).
Installation method:
Supports a variety of mounting configurations for horizontal and vertical tension measurement.
Provides standardized mounting holes or interfaces for easy integration into production line equipment.

Environmental adaptability

Operating temperature range:
-10°C to +70°C.
Storage temperature range:
-20°C to +85°C.
Protection level:
IP65 or higher, suitable for industrial environment, dust and water resistant.
Anti-interference:
The design meets the requirements of industrial electromagnetic compatibility and can work normally in electromagnetic interference environment.

Features

High accuracy and stability:
Designed for critical tension measurements to ensure stable output with minimal error.
Wide range adaptability:
Supports high load measurements up to 50 kN and ADAPTS both dynamic and static tension control.
Rugged and durable:
Industrial grade structure design, suitable for harsh industrial environment.
Easy to integrate:
Provides standardized signal output for easy integration with PLC or DCS systems.

Application Scenarios

Paper industry: Monitor and control paper tension to ensure roll uniformity.
Film and plastic processing: Measurement of film tension on production lines.
Metal processing: such as metal strip tension control in rolling mills.
Textile industry: Measuring and regulating fabric tension.
Packaging equipment: control the tension of packaging materials to prevent too tight or too loose.
2024-12-02 BY
IN Company News

ABB PPC907BE 3BHE024577R0101 Circuit board

ABB PPC907BE (3BHE024577R0101) is an industrial-grade controller module that belongs to ABB’s AC800 family of hardware platforms and is widely used in automation and control, especially in process control and power applications. The following is the detailed parameter and function description of the module:
1. Module type and function
Module type: Process Controller.
Purpose: As a core processing unit for managing and coordinating multiple subsystems in a distributed control system (DCS).
Applicable platform: ABB 800xA distributed control system.
2. Processing power
CPU Performance:
High-performance processor with support for complex control algorithms and logic processing.
Supports multitasking and is suitable for real-time applications.
Memory:
Provide enough RAM for program execution.
Contains non-volatile storage for storing user program and configuration data.
Operating system:
Run ABB’s dedicated real-time operating system for fast response and high reliability.
3. Communication ports
Supported protocols:
Modbus RTU/TCP
Profibus DP
Ethernet/IP
OPC UA and other industrial agreements.
Port type:
Ethernet interface: Usually dual-network port design, support redundancy.
Serial interface: RS-232 or RS-485 for connecting field devices.
Network functions:
Supports redundant network configuration to ensure communication stability.
Supports communication with the upper system (SCADA or HMI) and lower field devices.
4. Input and output
I/O support:
Local I/O: Supports direct connection to digital and analog input/output modules.
Remote I/O: Connect the remote I/O unit through the communication module.
Signal support:
Analog signal: 4-20mA or 0-10V.
Digital signal: switching input/output.
5. Power Supply
Power supply requirements:
Input voltage: Usually 24VDC.
Power consumption: Low power consumption, depending on the system configuration.
6. Environmental adaptability
Working temperature:
It is usually -25°C to +70°C.
Storage temperature:
-40°C to +85°C.
Protection level:
It is usually IP20 (module itself), which can achieve a higher protection level if installed in the cabinet.
Anti-seismic and anti-interference:
Meet the standards of anti-vibration and anti-electromagnetic interference in industrial environment.
2024-12-02 BY
IN Company News

YOKOGAWA AIP830-111 Keyboard

The Yokogawa AIP830-111 is a keyboard for industrial control devices commonly used in Yokogawa’s DCS (Distributed control systems), such as the CENTUM series. Here is a description of some common parameters and functions of the device:
Main parameters and functions:
1. Device type
Type: Industrial keyboard for operating and monitoring system interface.
Purpose: As a human-computer interaction device for operator station (HIS), for the control system of Yokogawa.
2. Compatibility
Adaptive system: Yokogawa DCS system (such as CENTUM CS, CENTUM VP series).
Connection mode: Usually PS/2, USB or a specific industrial communication interface.
3. Keyboard layout
Number of keys: Complete QWERTY keyboard layout and includes special function keys.
Function button:
Dedicated shortcut keys for system operation, used for quick access control functions.
Custom programming keys to meet the special needs of industrial processes.
4. Physical parameters
Dimensions: Conforming to the standardized dimensions of industrial equipment, easy to embed or place on the operator station workbench.
Material: Industrial grade durable material, with corrosion resistance, dust resistance function.
Color: Usually gray or dark, suitable for industrial environments.
5. Environmental adaptability
Operating temperature range: 0°C to 50°C (typical industrial environment).
Protection level: Some models have IP level protection (such as dust and water splash).
Durability: Designed for high frequency of use, with long-term stability.
Step 6 Power supply
Power supply: Power supply through the cable (such as via USB or dedicated interface).
2024-11-29 BY
IN Company News

FOXBORO FBM233 P0926GX Ethernet communication module

Basic information
Module model: FBM233
Part number: P0926GX
Type: Analog output module
Application: Support multi-channel analog signal output for driving actuators or other analog devices.
Compatible platform: Foxboro I/A series control system.
Technical parameter
Output signal
Support type:
Current output: 4-20 mA, suitable for industry standard analog control.
Number of channels:
Eight independent channels, each of which can be configured and operated independently.
Resolution:
16-bit digital-analog conversion ensures high accuracy of the output signal.
Load capacity:
Maximum load impedance: 750 ohms.
Accuracy:
±0.05% FS (full scale).
Isolation and protection
Channel isolation:
Each channel is electrically isolated from other channels and system circuits to ensure signal independence.
Overload protection:
The output channel has the function of short circuit and overload protection.
Ground protection:
Provides electrical isolation between modules and systems.
Communication and interface
Module interface:
Compatible with Foxboro’s I/A series modular I/O systems for fast connectivity.
Protocol support:
Communication and control via Foxboro series controllers.
Environmental parameter
Working environment:
Temperature range: -20°C to +70°C.
Humidity: 5%-95%RH (no condensation).
Storage conditions:
Temperature range: -40°C to +85°C.
Vibration resistance:
Comply with industrial environmental standards (IEC 60068-2).
Physical characteristics
Size:
Compact design, specific dimensions refer to the Foxboro I/A series specifications.
Weight:
Usually less than 1 kg.
Installation method:
Supports standard modular installation and can be inserted into the Foxboro I/O rack.
Functional characteristics
High precision output:
With 16-bit resolution and low error design, the accuracy of analog signal output is ensured.
Flexible configuration:
Each channel supports independent configuration and monitoring to suit different process requirements.
High reliability:
Industrial grade design, adapt to harsh environment, ensure long-term stable operation.
Self-diagnosis function:
With channel condition monitoring and fault alarm functions, it helps to quickly diagnose problems.
2024-11-29 BY
IN Company News

ABB 1TGE120021R0010 Communication gateway

ABB 1TGE120021R0010 is a communication gateway module commonly used in industrial automation systems as a protocol converter or communication interface device. The following is a detailed description of the parameters and characteristics of this model:

Basic information
Model: 1TGE120021R0010
Category: Communication Gateway
Main purpose: to realize the conversion between different industrial communication protocols, support multi-network integration and data sharing.
Applications: Industrial automation, process control systems, power, manufacturing, building management, etc.
Technical parameter
Electrical parameter
Power requirements:
Input voltage: 24 V DC (range: 18~30 V DC).
Power consumption: Usually around 5 W.
Working environment:
Temperature range: -20°C to +70°C.
Storage temperature: -40°C to +85°C.
Humidity: 5%~95% (no condensation).
Anti-interference ability:
Comply with IEC standards for electromagnetic compatibility in industrial environments.
Interface and protocol
Communication interface:
Ethernet interface:
1-2 RJ45 ports, 10/100 Mbps adaptive.
Serial Port:
1-2 RS-232/RS-485/RS-422 optional ports.
USB port: For device configuration and maintenance (optional).
Fieldbus interface (depending on the model) :
Modbus RTU/ASCII.
CANopen, Profibus, or other industrial bus (optional).
Supported protocols:
Industrial Agreements:
Modbus TCP/RTU
OPC UA
IEC 60870-5-104 (Power Communication Standard)
IEC 61850 (for Smart grids)
BACnet/IP (Building Automation)
Network protocol:
IP, TCP, and UDP
HTTP/HTTPS, FTP (for remote access)
DHCP, DNS (Dynamic IP Allocation)
Multi-protocol gateway functions:
Supports bidirectional conversion between protocols, such as Modbus RTU and Modbus TCP, or OPC UA and other fieldbus protocols
2024-11-29 BY
IN Company News

ABB PM865K01 3BSE031151R1 controller

The ABB PM865K01 (Product code: 3BSE031151R1) is a high-performance AC800M series controller module used in industrial automation and process control systems. The following are the detailed parameters and features of the module:

Basic information
Product model: PM865K01
Product Code: 3BSE031151R1
Controller type: High performance CPU module
System platform: AC800M series control system
Application field:
Automation and process control in complex industrial environments such as power plants, petrochemicals, pharmaceuticals, and mining.
Technical parameter
Processing capacity
CPU:
Model: Freescale MPC860
Main frequency: 133 MHz
Architecture: 32-bit RISC processor
Memory:
RAM: 16 MB for running the application.
Flash: 16 MB for storage of system configuration and user programs.
Real-time performance:
The system supports periodic tasks with a minimum control period of 10ms, and is suitable for scenarios with high dynamic performance requirements.
Communication interface
Built-in interface:
Ethernet interface: 2 RJ45 ports (redundancy support), the rate of 10/100 Mbps, used to control network communication.
Serial interface: one RS-232C/RS-485 communication port for point-to-point connection between devices.
Support protocol:
Industrial protocols: Modbus TCP/IP, OPC, IEC 60870-5-104.
ABB proprietary protocol: MMS (Manufacturing Message Specification) for system integration and diagnostics.
Other protocols: PROFINET, EtherNet/IP (supported by extension modules).
Redundant support:
The PM865K01 supports CPU, communication, and power redundancy to improve system reliability.
2024-11-29 BY
IN Company News

HONEYWELL CC-PAIH02 Analog input module

The Honeywell CC-PAIH02 is an Analog Input Module in the Honeywell Experion PKS system, widely used in process control systems to achieve high-precision analog signal acquisition. The following is the detailed parameter information of the module:
Product model: CC-PAIH02
Module Type: Analog Input Module
Application system: Experion PKS series, C300 controller for industrial automation and process control.
Function: Support multi-channel high-precision analog signal input, acquisition process variables, such as temperature, pressure, liquid level, etc.
Technical parameter
Input signal
Support signal types:
Current signal: 4-20 mA
Voltage signal: 0-5V or 1-5 V
Thermal resistance (RTD) : such as Pt100
Thermocouple: Support multiple types (K, J, T, etc.)
Number of channels:
16 channels: Each channel is independently isolated to ensure the accuracy of the signal.
Sampling resolution:
16-bit A/D conversion provides high-precision data acquisition.
Input impedance:
Voltage input: High impedance design (usually ≥10 MΩ)
Current input: Low impedance design, about 250 Ω.
precision
Accuracy range: ±0.1% FS (full scale).
Temperature drift: less than ±0.005%/°C.
Isolation and protection
Inter-channel isolation:
Each channel is electrically isolated from ground and other channels (typical isolation voltage: 500V).
Overcurrent protection:
The input terminal has short circuit and overcurrent protection function.
EMI/RFI Immunity:
Comply with electromagnetic compatibility standards in industrial environments.
Communication and interface
System integration:
Seamless integration with C300 controller.
Protocol support:
Compatible with the Experion PKS system standard communication protocol.
Module interface:
Standard DIN rail mounting for quick connection and replacement.
2024-11-29 BY
IN Company News

PIONEER MAGNETICS PM3328B-6-1-3-E 80026-524 Power module

PM3328B-6-1-3-E is an industrial power module used to provide stable DC power supply, commonly used in control systems, industrial automation equipment and communication equipment. The following is the detailed parameter information of this model:
Basic information
Model: PM3328B-6-1-3-E
Category: Industrial power module
Use: Efficient DC power supply for electronic control equipment, sensors, relays or other industrial equipment.
Electrical parameter
Input voltage:
Wide range input: Usually support 85~264V AC (single-phase AC) or 110~370V DC.
Frequency range: 47~63Hz (AC input).
Ripple and noise: The output ripple is less than 100mV (peak-to-peak value) to ensure that the output voltage is stable.
Efficiency: ≥85%, depending on input voltage and load.
Protection function:
Overvoltage protection: Automatic protection when the output voltage exceeds the rated value.
Overcurrent protection: current overload time limit flow or disconnect output.
Short-circuit protection: automatic protection when short-circuit, automatic recovery after the fault is eliminated.
Overtemperature protection: The protection mechanism is triggered when the module temperature is too high.
Environmental parameter
Operating temperature range:
It is usually -40°C to +70°C (limited at full load).
Storage temperature range:
-40°C to +85°C.
Relative humidity:
5% to 95% (non-condensation).
Cooling method:
Natural cooling or fan-assisted cooling (depending on power requirements and installation environment).
Physical characteristics
Size:
Refer to the product manual for the specific size, but it is usually a compact design, suitable for industrial cabinet installation.
Weight:
About 500~800g, depending on the module material and heat dissipation design.
Installation method:
Support standard guide rail installation or screw installation.
Functional characteristics
High reliability:
Suitable for industrial environment, high temperature resistance, electromagnetic interference (EMI) resistance.
Meet the high stability requirements of industrial power supplies.
Wide input range:
Can adapt to different countries and regions of the grid voltage.
High performance:
High energy efficiency ratio, reduce energy loss.
Compatibility:
Good interface compatibility with various industrial equipment and control systems.
Application field
Industrial Automation:
PLC control system, robot control, electrical automation equipment.
Communication system:
Base station power supply, communication module power supply.
Energy sector:
Auxiliary power supply in photovoltaic power generation and wind power generation system.
Instruments and meters:
Sensors, test equipment, data acquisition equipment.
2024-11-29 BY
IN Company News

ABB 3BHE032025R0101 PCD235A101 Excitation controller

ABB 3BHE032025R0101 (PCD235A101) is a high-performance excitation controller commonly used in the excitation system of synchronous generators. The following is a detailed description of the parameters and functions of this model:
Model: PCD235A101
Product code: 3BHE032025R0101
Category: Excitation controller
Application scenario:
Excitation control of synchronous generator.
Used for voltage regulation and reactive power management in power plants (thermal power, hydropower, wind power, etc.) or industrial power grids.
Technical parameter
Power input:
DC power supply: 24V or 48V DC input is usually supported (refer to the technical manual for the specific range).
Power consumption: Low power design, power consumption is usually less than 50W.
Output parameters:
Field current range: Supports a wide field current range (usually 0~10A or higher).
Excitation voltage range: The output excitation voltage ranges from 0 to 200V (The specific range needs to be determined based on the configuration).
Control function:
Automatic Voltage Regulation (AVR) : High precision voltage regulation capability.
Power factor control (PFC) : Maintain a stable power factor in the grid-connected state.
VAR Control: Control reactive power output to meet grid requirements.
Dynamic response:
Fast response to generator load changes to ensure stable operation of the system.
The dynamic voltage recovery time is usually less than 20ms.
Protection function:
Overexcitation and underexcitation protection.
Generator voltage too high or too low protection.
Excitation circuit open or short circuit protection.
Temperature protection (overheating alarm or automatic shutdown).
Communication and interface
Communication protocol:
Modbus RTU (RS-485 port).
Optional support for industrial communication protocols such as IEC 61850 or Profibus (depending on the configuration).
Interface type:
RS-485 interface for communication with external systems.
Analog input/output interface for collecting and transmitting signals.
Digital input/output interface for logic control.
2024-11-29 BY
IN Company News

ABB 3BHE025541R0101 PCD231B101 Excitation controller

ABB 3BHE025541R0101 PCD231B101 is an excitation controller commonly used in the excitation system of generators in the power industry. The following are details about the common parameters and features of this controller model:
Basic parameter
Model: PCD231B101
Product code: 3BHE025541R0101
Features:
Provides stable generator excitation control.
Supports multiple operating modes (such as automatic voltage regulation, power factor control, reactive power control, etc.).
Excitation systems for synchronous generators.
Design standards: comply with the International Electrotechnical Commission (IEC) and related power industry standards.
Electrical parameter
Input voltage: Multiple input voltage levels are supported, usually 24V DC or 48V DC.
Control range: Precise control of excitation current and generator voltage.
Power capacity: Support small to large generator excitation system, the specific power capacity depends on the actual system configuration.
Communication and interface
Supports a variety of communication protocols, such as:
Modbus RTU
IEC 61850 (optional)
Multiple interfaces are available: RS-485, Ethernet interface (depending on configuration).
Functional characteristics
High reliability:
Designed for harsh industrial environments with high anti-interference capability.
Supports redundant configuration to improve system reliability.
Protection function:
Over-voltage and under-voltage protection.
Overexcitation and underexcitation protection.
Current and voltage limit protection.
Fast dynamic response:
Fast response to load changes to maintain system stability.
Programmability: allows users to customize parameters and control logic through software tools.
Physical characteristics
Size and weight: small size, easy to install, the specific size need to consult the product technical manual.
Installation mode: Support standard rack installation or wall-mounted installation.
Cooling method: Usually natural cooling or fan cooling.
Application field
Thermal power plants, hydroelectric power plants, wind power plants and other types of power generation equipment.
Voltage regulation and stability control of industrial power grids.

Menu
Call us 24/7+86 19066591275

Search for products

Back to Top
Product has been added to your cart
phone: +86 19066591275
to whats
+8619066591275
email: abbdcs36@gmail.com